Search This Blog

Tuesday, June 5, 2012

Thermometer (using ATtiny85 and 74HC595) -Final version!

3 comments:

  1. Can you please document how you did this? Im trying to figure out how to get the attiny85 to display temp correctly. All i get is 0.00 and -127 as temp values.

    ReplyDelete
  2. What kind of temp. sensor are you using? Thermistor !?

    ReplyDelete
  3. If you got the Attiny85 to work with the LCD (shiftLCD) and you are using a Thermistor as a temp. sensor. Check this code:
    http://arduino.cc/playground/ComponentLib/Thermistor
    Note that I used an Arduino sketch to program the Attiny85
    I also calibrated the sensor using a consumer Temp monitor and adjusted the code to reflect that.

    ReplyDelete